Doesn’t it make sense to buy The Worlds MOST Powerful and Effective Anti-Aging, Anti-Free Radical Products?
1. Most Ionic silver and nanoparticles colloids are being made with Chemicals.
2. Nanoparticle Colloids that use Hydrogen Peroxide have been scientifically proven to cause premature gray hair.
3. The common nanoparticle or ionic generator can produce a reported range from 8 PPM to 500 PPM of chemical saturated colloids.
4. Most Silver nanoparticles have been reported to be close to the same sizes as many viruses and bacteria are.
That means that the nanoparticle is huge, bulky and cumbersome when compared to a single atom.
5. Solutions that are made with hydrochloric acid (HCL), can cause hair to fall out and cause premature baldness.
Medication labels that list HCL as an ingredient frequently mention Hair Loss as an unwanted side effect. You do not want to experience this with a colloidal silver nanoparticles solution.
6. Producers that use salt (sodium chloride), create a byproduct in their process that's called a chloride solution. This occurs after the electrolysis process is done. Chloride solutions are known to cause almost instant cell and nerve damage as well as photo-sensitivity, argyria or blue skin.
7. Some producers utilize formulas containing nitrate chemicals. These chemicals are also known cause to skin photo-sensitivity which is referred to Argyria or the Blue Man Effect.
8. Cyanide chemicals are used by some colloidal silver nanoparticle producers. The residues of this toxic chemical can cause major damage to the organs.
The FDA has even reported that some colloidal silver solutions contain cyanide. Be sure to avoid these.
9. Nanoparticles have caused kidney damage because the huge nanoparticles get stuck in the kidneys. Read the Mayo Clinic Report.
Nanoparticle Images with TEM Electron Microscopes:
Many companies promote their Low PPM Products with images that are done with an electron Microscope.
If you look carefully, you will see that their particles sizes are not consistent and can be tiny specs to massive nanoparticles that are over 300 nm.
That is because their electrolysis is basically two silver electrodes under the water that barely touch, the electricity breaks down the particles, but it does not do it uniformly. There is NO way to control what the electrodes produces in the nanoparticle products, and that is why you see color variations from opaque to dark colors. Then there is the "Zoom Factor" in their pictures to consider; they can zoom in and zoom out to make it look like their products have super small particles.
Experts State: "Colloidal Silver nanoparticle solutions with particles tens to possibly hundreds of thousands of times larger than atomic particles, have a history of limited effectiveness providing temporary relief from symptoms.
Based on this observation, it’s safe to conclude that colloidal silver solutions with atomic sized particles will consistently out perform any ionic or nanoparticle silver solution.
The smaller size of atomic particles and higher concentrations of silver in these solutions can insure one of getting the maximum amount of absorption and assimilation with the best possible results."
Atomic Particle solutions are clear as water but it's not just water here's why: Atoms do not reflect light.
The wavelength of visible light is about 10-6 microns. The size of a typical atom is about 10-10 m, which is 10,000 times smaller than the wavelength of light.
Since atoms are extremely small (far smaller than the wavelengths of visible light), they’re much too small to reflect light in a silver solution and cannot even be seen with optical microscopes.
You would need a destructive test such as the EPA 200, using a Plasma Arc ICP Spectrometer to bind up the atoms into larger particles that can then be measured and identified.
Because no chemicals are present in our solutions, there is no color and therefore No Large Particles are present to reflect light.
10. Some producers use oxygen as the catalyst to make their colloidal solutions. They inject oxygen into the solution and use a magnetic stirrer to create conductivity while the generator is in operation. This produces high levels of nitrogen with nanoparticles in their solution.
When you freeze the silver water solutions that use air as the catalyst, the chemicals drop to the bottom along with the silver nanoparticles. This can be seen when the silver water is thawed out.
Colloidal silver producers who use air as a catalyst may not start out with chemicals but their product ends up with chemicals when it is completed.
11. Nanoparticle colloidal solutions are too heavy to stay suspended in the solutions by themselves. They depend on the chemicals to help the heavy nanoparticles float.
This explains why colloidal solutions when frozen and then are thawed out you can see the nanoparticles drop to the bottom along with chemicals.
12. Many producers of low Parts Per Million products do not list the exact chemical contents in their product label.
For example: When the label states Colloidal Silver.......10 PPM this does not list all of the ingredients. The label facts are wrong. Such labeling is done to avoid disclosure of chemical contents. (A simple freezer test will prove that they have chemicals). An accurate label would read: Silver: 10 PPM, Hydrochloric Acid 20% of solution.
13. The FDA has repeatedly warned the consumer about the use of harmful chemicals contained in many silver nanoparticle solutions. For further information read their 1999 Report.
14. One of the most important considerations when buying colloidal silver products is the credibility of the company producing it.
Most producers of colloidal silver solutions do not use credible testing facilities. To do so would mean they would have to disclose the chemical contents in their products.
14 Reasons to Avoid IMPOTENT Low PPM Silver Nanoparticle Colloids
When some of these types of products are exposed to heat, cold, or even sunlight, the chemicals and particles tend to drop to the bottom of the solution.
This proves that silver compounds cannot stay suspended in a solution without the help of chemicals.
Our products are of ultra-high purity and no chemicals are ever used in the production process. When our products when exposed to sunlight, high heat, low heat, or even severe cold conditions, nothing falls out of solution to the bottom of the container.
These products and statements have not been evaluated by the United States Food and Drug Administration and are not approved to diagnose, treat, cure or prevent disease. The information provided on this site is for informational purposes only and is not intended as a substitute for advice from your physician or other health care professional. You should not use the information on this site for diagnosis or treatment of any health problem or to prescribe medication for a treatment. You should always consult with a healthcare professional before starting any diet or supplementation program. Product availability, pricing, and promotions are subject to change without notice.
Topics
Discussed: Why colloidal silver nanoparticles do not work
The NANOPARTICLE Colloidal Silver Industry has a Reputation of Being Toxic because:
- They have MASSIVE Nanoparticles that can get trapped in the kidneys, Liver and even on the Skin Tissue.
- The Chemical Compounds that were applied have been shown to cause Argyria aka Methemoglobinemia. A rare skin Blue-Gray skin condition that can be triggered by a combination of chemicals and silver. While Silver has many antiviral and antibacterial benefits, it's best to avoid Colloidal Silver or Ionic Silver that is made with chemicals or "natural" byproducts.
Our High PPM colloidal products do NOT have those dangers!
There are no studies that prove Atomic Particle (Trace Mineral) High PPM products are toxic or have side effects!
But there are plenty of reports that explain that nanoparticle colloidal silver is TOXIC!
Our 21st-Century Technology replaces the old electrolysis process that has dominated the industry for the last 30 years, with a best particle size, better PPM concentrations, and 100% Natural Chemical (Catalyst) Free production.
The nanoparticle technology has four problems: Chemical content, massive particles and Low PPM, they have been reported to be toxic due to chemicals and oversized particles.
Using this new technology, we produce atomic size particles of silver, gold and other noble metal elements. Atomic Size particles are the absolute safest particle size in the world to utilize.
According to the World Health Organisation (WHO), ordinary tap water may contain 7 PPM of silver nanoparticles. If silver is already present in tap water, then, it is a further testament that Low PPM nanoparticle products do not work, otherwise we would have a very healthy population.
We don't sell RIDICULOUSLY Low Potency Colloidal products that are only 10 or 20 PPM.
We are in this to provide solutions to serious emerging problems such as viruses and bacteria that have mutated into tougher antibiotic resistant strains that Scientists have no answers or solutions to stop them.
There are more Negative Reports against Toxic Nanoparticle Colloidal Silver and none on Atomic Particle Colloidal Products.
GoldenGevity High PPM Products
Open weekdays 9 AM- 4 PM 619-752-6777
Nanoparticles are Massive Compared to Single Atoms