These products and statements have not been evaluated by the United States Food and Drug Administration and are not approved to diagnose, treat, cure or prevent disease. The information provided on this site is for informational purposes only and is not intended as a substitute for advice from your physician or other health care professional. You should not use the information on this site for diagnosis or treatment of any health problem or to prescribe medication for a treatment. You should always consult with a healthcare professional before starting any diet or supplementation program. Product availability, pricing, and promotions are subject to change without notice.
* The Calculations are approximate and will vary.
Topics Discussed: Understanding High PPM of Atomic Size Particles
GoldenGevity High PPM Products
Open weekdays 9 AM- 4 PM 619-752-6777
The Difference Between Our Products and Theirs
You've tried the rest, now try the BEST!
6. Others Limitations
Yes........ You Can Freeze them! With other Low PPM products you cannot.
Yes......... You Can heat them! With other Low PPM products you cannot.
Yes..........You can blend them with other juices, or drinks! You cannot do that with chemically made nanoparticle products.
Yes ..........You Can leave them in the Sun! We have gone past 90 Days with NO problem, With other Low PPM products you cannot.
Yes ...........You Can expose it to UVA / UVB Rays, and they will not spoil as do others products.
7. Many other companies make it a selling point that they use Glass Bottles and have made it a mission to stress how important it is to use Glass Bottles, often pointing out the harmful chemical agent's in NON-Food Grade plastic containers twisting the truth just to maintain market share.
The fact is that "THEY" need to use glass bottles because of the chemicals they use, their chemicals will create a "leeching" of the Toxic Chemicals found in most plastics, so they over emphasize reasons to use only Glass Bottles and make it appear as if it is a requirement and a sales feature.
Some Some of the disinformation provided is:
1. Freezing or reusing PET bottles releases unsafe levels of carcinogens such as “dioxins” or the plastics additive DEHA (diethylhydroxylamine) into whatever liquids they may contain.
2. However, such claims are inaccurate on two counts: DEHA is not used in the manufacture of PET bottles (nor is it created through the breakdown of such bottles), and DEHA is not classified as a human carcinogen:
Snopes (http://www.snopes.com/medical/toxins/plasticbottles.asp) Found that:
"...DEHA is neither regulated nor classified as a human carcinogen by the U.S. Occupational Safety & Health Administration, the National Toxicology Program or the International Agency for Research on Cancer, the leading authorities on carcinogenic substances.
In 1991, on the basis of very limited data, the U.S. Environmental Protection Agency classified DEHA as a “possible human carcinogen.” However, in 1995, EPA again evaluated the science and concluded that ” … overall, the evidence is too limited to establish that DEHA is likely to cause cancer.”
Further, DEHA is not inherent in PET as a raw material, byproduct or decomposition product.
Moreover, DEHA has been cleared by FDA for food-contact applications and would not pose a health risk even if it were present.
Finally, in June 2003, the Swiss Federal Laboratories for Materials Testing and Research conducted a scientific study of migration in new and reused plastic water bottles from three countries. The Swiss study did not find DEHA at concentrations significantly above the background levels detected in distilled water, indicating DEHA was unlikely to have migrated from the bottles. The study concluded that the levels of DEHA were distinctly below the World Health Organization guidelines for safe drinking water.
The American Cancer Society also debunked such claims, stating:
In fact, DEHA is not inherent in the plastic used to make these bottles, and even if it was the U.S. Environmental Protection Agency (EPA) says DEHA “cannot reasonably be anticipated to cause cancer, teratogenic effects, immunotoxicity, neurotoxicity, gene mutations, liver, kidney, reproductive, or developmental toxicity or other serious or irreversible chronic health effects.” Meanwhile, the International Agency for Research on Cancer (IARC), says diethylhexyl adipate “is not classifiable as to its carcinogenicity to humans.”
As for the notion that freezing water in plastic bottles releases dioxin, the American Chemical Council asserted:
There simply is no scientific basis to support the claim that PET bottles will release dioxin when frozen. Dioxins are a family of chemical compounds that are produced by combustion at extremely high temperatures. They can only be formed at temperatures well above 700 degrees Fahrenheit; they cannot be formed at room temperature or in freezing temperatures. Moreover, there is no reasonable scientific basis for expecting dioxins to be present in plastic food or beverage containers in the first place.
You can read more here: http://www.gold2live.com/Blog-High-Grade-Colloids.html?entry=colloidal-silver-glass-bottles-or
Atomic Particle Colloidal Silver and our other similar products are relatively new to the colloidal industry they are the most Organic if not the most natural products in the Colloidal Industry. Even though we have been marketing them since 2006, people are still not aware of the difference between our products, nanoparticle and ionic products.
We have a lot of information on our website, and this page alone is the "short" version of the entire site.
Many people just want to know the primary difference between our products and the traditional Low PPM Producers. So, here are the facts that may assist you in making a well-informed decision.
1. Many producers of Low PPM Colloidal Silver will tell you that the solution must be Dark Brown, or have some color to it that will vary from an opalescent opaque color to a brownish tan color. The reason they do this is simple: Justification for their inferior chemically made products. So they express and imply that real colloidal silver products should be this color or that color.
Our Products are "Clear as water" a testament of absolute purity and proof that we do not use any chemicals or herbal byproducts that produce color changes as well as other chemical compounds that would further create other chemical mixtures when mixed in with the acids in the stomach.
Furthermore, Atomic Particles do not reflect light, which is why the solutions are clear as water.
2. Many manufacturers of Low PPM Colloidal Silver claim to have the smallest particle sizes of nanoparticle colloidal products, ignoring the fact that Atomic Particles are the ABSOLUTE smallest size achievable and have been in the market place for more than 12 years.
They willfully deceive their readers into believing their hype which the Rice University has contradicted beyond a doubt that Nanoparticles and Low PPM do not work very well. But in reality, it's the smaller particles like Ions and most likely atomic particles that bring on the positive results reported by nanoparticle producers.
It's all over our website! The smaller the particle, the better it can penetrate into the invading pathogens. The reason our products work so well is that we have Atomic Size Particles, in fact, we have Tens of Thousands to Hundreds of Thousands of Atoms, attached to water molecule clusters.
Once in the bloodstream, enzymes go to work on the water molecules to absorb the waters life-sustaining properties, in the process, the digestive enzymes cause the release of hundreds of thousands of atoms which immediately go to work on invading pathogens. For example: If One PPM has tens of thousands of individual atomic particles, then 4,000 PPM would have about 40 thousand atoms or more! That is why customers come back again and again because our products produce what others cannot and that is RESULTS!
We Do Not Use Any Chemicals, many others do:
Ours are 100% Natural, No chemicals or herbal natural catalysts are ever used!
Particle Size is a Powerful Factor to be considered:
The image is from Stanford University Silver Nanoparticle, showing the silver atoms inside of it. Which also what a Silver Saturated Water Molecule Cluster may also resemble.
The Higher the PPM the Higher the Kill Ratio
3. We have said this since 2006, the higher the PPM, the higher the kill ratio of pathogens.
Thanks to the Rice University who conducted a study in February 2012 that determined that the smaller the particle, the more efficient it would be in destroying pathogens. Furthermore, they concluded that the higher the PPM, the higher the kill ratio, and fundamentally determined that Low PPM was not enough to destroy stubborn viruses and bacteria.
Low PPM producers still assume that most people are ignorant and will not do their homework and attempt to feed them their "schpiel" on how the "large surface area" is more useful because it is a larger particle.
Then, they try to explain that they have a "Higher Particulate" which means nothing since their PPM is still way too low. It sounds "scientificky," but it's a deceptive explanation.
We can and do make 200 to 18,000 PPM that you can test in your home with a High PPM TDS Meter. At 12,000 PPM X 10,000 atoms (per molecule cluster) = approximately 120,000,000 atoms or so!
Just think about it: Viruses and bacteria quickly saturate the body with millions of PPM of viruses, do you honestly think 20 PPM will be enough? Of course not!
That low PPM will only tickle or irritate them, and cause them to create more toxins to defend themselves and replicate much faster as a defense mechanism from the nanoparticles (which is called the Herxheimer Effect).
4. There is no question that Colloidal Silver Chemicals are the reason for the side effects that have been published.
Nanoparticles ARE metallic and are quite heavy. When they have been ingested, the stomach acids and try to break down the silver nanoparticles, this can create additional silver chemicals in the stomach. Then you add to the equation the chemicals that they used to make the colloidal silver, and when they are coupled with the newly created chemicals caused by the stomach acid, your body could suffer the terrible reported side effects.
Atomic Size Particles of Silver, Gold or any other metal are NO longer metallic, but crystalline in quality.
In-house tests that have been done, by adding HCl (Hydrochloric Acid) to our high PPM products have shown no visible color changes, the solution stays clear as water because acids do not react with minerals. Therefore, Atomic Size Particles are not only the most powerful in the world, but they are the SAFEST to consume, even at the High PPM Concentrations. The ONLY Test that can be performed to identify the metals in our solutions is an ICP Plasma Arc Spectrometer, which will destroy the solution to make our particles into nanoparticles, they can then be counted.
With 12 years in business, not one single side effect has ever been reported.
Not one single negative study or claim have been done by any medical or pharmacological institution against atomic particle colloidal silver.
The only side effect is the people feel great!
That cannot be said of Low PPM Nano-particle Manufacturers, there are just too many negative reports on their products.
Silver and Nobel Metal Atomic Particles Are No Longer Metallic
Atomic Silver Particles Are The Safest to Use
Atomic Particle Products Do Not Have Limitations that Low PPM Products Have
100% Natural High PPM Products Can Be Diluted
5. Let face it, not everyone needs High PPM especially if you need it just for maintenance purposes, or you have a child, small pets or animals.
With our products (because they are 100% Natural, and have no other chemicals) they can be diluted to almost the PPM that you desire.
With our impeccable products, you have the ability to create hundreds maybe even thousands of ounces of lesser PPM at a fraction of the cost of an expensive silver or gold generator, which only produces 7-10 PPM in a few hours.
We do not recommend anything under 200 PPM, although we have customers that happily make 50 PPM and love it, we feel you get better results at 200 PPM and up, than anything under that.
Keeping a 12,000 PPM Bottle in your Medicine Cabinet is a wise choice in case of an Emergency or Catastrophy.
You can get a good idea of how much you can make with the *calculator on the right side. For more information and other calculations visit this link: http://www.gold2live.com/make-your-own.html
Our products are:
Not made with Cyanides
Not made with Nitrates
Not made with Fluorides
Not made with Chlorides (salts)
Not made with Toluene
Not made with Nitric Acid
Not made with Hydrochloric Acid
Not made with Hydrogen Peroxides
Not made with Mercury Compounds
Not made with Bromides or Phosphates
Not made with any "Organic" Herbal Catalysts (they still create huge nanoparticles, Low PPM and chemical compounds in the stomach).
All the chemicals and byproducts listed above will create some kind of color in the solution.
Just remember, if their solution has some color, or cloudiness when you look at it, then it HAS Chemicals.
Check out these links that offer more information on the chemicals others use:
8. Nanoparticle Producers of Low PPM Colloid solutions do not have the equipment, experience or scientific understanding of how to make atomic-sized particles. They are not actual inventors (although they try to "appear" as if they are) all they know how to do is to use a 70-year old Copy Cat Electrolysis Process that any 13 Year old can do in their garage.
This puts them on the defensive, and they feel uneasy as they can't explain the reason why they cannot produce Atomic Particle Colloidal Products and why their products cannot match our particle size, much less our effectiveness.
They attempt to discredit or undervalue all rival products by conducting their “In-House” laboratory tests. They claim to have millions of dollars in laboratory equipment, but that does not mean that they are correct or nondiscriminatory in their conclusions.
Some producers of Low PPM products have been in denial for decades; they thought that the nanoparticles solutions they produced were where just nanoparticles and nothing else. Until they read the Rice University's Research Report that also found ionic particles in their chemical solutions. They now admit that they "too" have some ionic particles, after decades of bashing Ionic Silver producers.
We are not limited to just SILVER or GOLD just look at our products page, and you will see many other elements and even elements that are blended with other High PPM Atomic Particle Colloids that do not conflict or cause spoilage when combined
We can make Colloidal Supplements out of almost any metals such as Iridium, Platinum, Rhodium, Ruthenium, (that by themselves may have health benefits of their own) we also make Copper, Boron, Titanium, Zinc, and others.
All with atomic size particles, highest PPM and of course 100% Natural Process that bypasses side effects that are associated with nanoparticle and Ionic colloidal products.
PET Bottle Myths
We are not to be considered "A One Trick Pony"
DMSO
Many "Low-End Low PPM" Nanoparticle Colloidal Silver producers claim to have the smallest particle size, yet when you ask questions on how to get the Colloidal Silver through the skin, or stomach lining, they will tell us to use DMSO, a chemical that opens the pores of the skin or stomach lining. This practice is dangerous and can create other health problems to the person that uses DMSO.
This fact alone proves and contradicts their claim as to having the smallest particle size! Their products do not work efficiently and cannot penetrate anything without the use of DMSO.
Atomic Size particles have no such problem, and DMSO is not needed at all since atomic size particles of metallic elements can penetrate through any cell and possibly into the heart of the cell, virus or bacteria.
We are aware of very charming and charismatic Doctors who have vested interest in certain companies that claim to have "Organic Colloidal Silver" they claim to use "Herbal Extracts" as the catalyst for making their low PPM Colloidal Silver Products.
Many Herbal Extracts contain MANY other minerals and SALTS that can also create a Chemically Saturated Solution when in the electrolysis process. Those products will be no different than any other Low PPM chemically made nanoparticle colloidal silver product, it will have the same dangers, the same horrific side effects of nanoparticle colloidal silver.
More relevant information on Particle Sizes:
More relevant information on PPM (Parts Per Million):
Plus! We have VERIFIABLE PPM Values that you can confirm at home! Many other's that claim to have High PPM test much lower than their stated PPM, because the chemical compounds they produce give false readings on the TDS meter, so you do not know what PPM you are getting.